Skip to content

X-ray inspection system for packaged products


  • X-ray inspection for packaged food or non-food products
  • Detects high density materials like metal, ceramic, stone or plastic
  • Easy operation with autocalibration and clearly arranged functions on 17“ touchscreen
  • XIA software for instant analysis and detection with high accuracy and reliability
  • Single or dual beam for optimized inspection of different product sizes and materials


X-ray system XRAY SHARK-XS GIG, easy handling


The XD68 is particularly suitable for packaged food or non-food products, for example in plastic packaging, jars, cartons and even metal foil or metal cans. Unwanted foreign objects such as metal, stones, ceramics or plastic with high density in the product are detected.

The hygienic design allows easy cleaning and maintenance of the device. This makes the XD68 particularly suitable for all companies and industries that have to ensure high hygiene standards (also available with IP66).


(former XBD45+)
(former XBD80+)
X-ray source
Single beam x-ray generator with max. 80kV (480W), variable in voltage + current
Dual beam x-ray generator with max. 80kV (2x480W), variable in voltage + current
Radiation leakage
3 µSv/h or less at 10 cm outside cabinet surfaces using all safety devices
X-ray protective curtains (lead-free) – quickly detachable, magnetic safety switches at cabinet doors and tunnel hatches, emergency stop push button, emergency stop in/out interfaces to safety circuits of production line, X-ray off key switch, PILZ safety circuit
X-ray detector
Low noise 816 mm line scan CCD, diode pitch 0.8 mm or 0.4 mm (optional)
X-ray view
1x top down
2x top down
Highly efficient, silent DC filter fans
Housing finish
Stainless steel grade AISI 304 / DIN EN 1.4301 (X5CrNi18-10)
Enclosure rating
IP54 (according to IEC 60529), including touch panel and fans
Conveyor belt type
Polyurethane belt white, food grade
Belt width
680 mm
680 mm
Scanning width
680 mm
680 mm
Conveyor speed
Conveyor speed by product, 0.05 to 0.98 m/sec (7 fixed speed steps)
Max. product dimensions
width x height:
650×180 mm / 560×250 mm / 500×300 mm / 450×350 mm / 320×450 mm
width x height:
680 x 380 mm
Max. product weight
50 kg total weight
Available reject method
Additional conveyor with air jet or transversal pusher
Product memory
255 different product set-ups
17“ color-TFT capacitive touchscreen
Inspection features
Autocalibration, auto adaption to density distribution, density, hard contrast, soft contrast, masking technology, SuperContrast, SizeFilter, AutoEdge masking, images AutoSave/Load, Multi Segment Inspection, metal can and foil inspection, fill quantity, generator energy by product, password protection
Programmable outputs (contamination, ready, Emergency OFF) Programmable inputs (Emergency OFF, wake up, optional control signals)
Data Transfer
Ethernet for remote support via internet, USB for external keyboard/ mouse/ memory stick
1.5 t
Power supply
3ph, 400 VAC +/- 10%, 50/60 Hz, 2.0 kW full operation
1ph, 230 VAC +/- 10%, 50/60 Hz, 2.0 kW full operation
Compressed air supply
without reject system 0 MPa (0 bar/ 0 psi)
with optional reject system minimum 0.4 MPa ( 4 bar / 58 psi)
Environmental conditions
0° to +30°C, / 32°F to 86°F with relative humidity max 90%, non-condensing
external cooling device recommendend/needed
CE, compliant to german x-ray regulations, specific adaptation for other countries

Delivery Scope


Inspection of packaged food and non-food products in

Further information for download:

Additional information can be found in the data sheet which is available here for download as PDF.