The PSQ RA series of metal detector (operating with a frame-probe) detects all kinds of metal, which means not only iron, but also aluminum, stainless steel, copper or mild steel.
The specialty of this detector is a low difference between edge and center of probe aperture. Therefore it is especially suitable if the depth of burden on the belt is more tan 600 mm. Its frame can be divided and easily be built around the belt.
This metal detector prevents damage, avoids downtimes and produces significant savings on repair costs.
|Model Name/ID||Metal detector PSQ/RA|
|Electronics||Analogue, self-adjusting, VFD noise filter, vibration immunity filter, detection level knob|
|Input||1 coaxial cable, probe|
|Output||Metal alarm: 1 relais with 2 floating changeover contacts, switching capacity 230V
5A resistive load, switchable between normally relaxed or normally activated mode
Fault signal: 1 relais with 2 floating changeover contacts, switching capacity 230V
5A resistive mode
|Inspection Method||High-frequency magnetic field, eddy current discrimination|
|Metal Detection||Ferrous, non-ferrous (e.g. aluminum or copper) and stainless steel|
|Product Compensation||Automatic ignoring of iron oxide and ores|
|Protection Type||Control box: IP55
Frame probe: IP67
|Ambience||Control box: -20°C up to +55°C
Frame probe: for execution PE up to +60°C
for execution PA6.6 up to +12-°C
|Product Temperature||-20°C up to +55°C / -4°F to 131°F|
|Power Supply||110-230V, 50/60 Hz, typ. consumption 15 VA|
|Interface||no digital interface|
|Maintenance||Maintenance-free, sensors calibrate themselves|
|Diagnostics||built-in-instrument for function control|